1. USE A SILICONE SPREADER TO LIGHTLY APPLY A SMALL AMOUNT OF AS-2578 or AS-CC48 TO THE TARGETED AREA TO BE BONDED. APPLY CEMENT TO BOTH SIDES OF THE TARGETED AREA TO BE BONDED TOGETHER.

2. AS-2578: WAIT A MINIMUM OF 20 SECONDS BEFORE ATTACHING THE TARGETED PIECES. MAXIMUM TIME IS 20 MINUTES.

AS-CC48: TIME MAY VARY BASED ON ROOM TEMPERATURE. WAIT UNTIL THE APPLIED CEMENT IS SEMI-DRY AND TACKY TO THE TOUCH.  DO NOT ALLOW CEMENT TO COMPLETELY DRY BEFORE APPLYING BOTH SIDES.

3. ALIGN ALL EDGES PRECISELY. BONDING AS-2578 OCCURS IN 8 SECONDS DUE TO THE STRENGTH OF AS-2578.  AS-CC48 BONDING IS IMMEDIATE UPON CONTACT.

4. DO NOT APPLY SOLUTION WITH FINGERS DIRECTLY. WASH ANY AS-2578 FROM HANDS OR BODY WITH SOAP AND WATER IMMEDIATELY.

INSTRUCTIONS

PRODUCT USE AND CLEANUP

Product Use

Permanent bonding of porous (water-absorbent) materials. Ideal for leather, foam, sponge, fabric, scuba, neoprene, cosplay foam, and more.

Application Methods

Silicone Glue Spreader or disposable brush.

Clean Up

AS-2578 is Water-based and non-toxic. Clean up with soap and water. for complete details visit allstuck.com.

WARNINGS

AS-2578 is non-toxic and non-flammable.

AS-CC48 is extremely flammable and should be kept away from sparks or flames.

AS-2578 and AS-CC48 are not intended for consumption or internal use.

AS-2578 and AS-CC48 do not contain harsh VOC solvents like FORMALDEHYDE, BENZENE, TOLUENE, OR XYLENE.

AS-2578 and AS-CC48 are not intended for use by children and should be kept out of the reach of small children.

AS-2578 and AS-CC48 are not intended for medical purposes and are not intended for topical or internal use.

AS-2578 Demonstration

This video demonstrates the application of AS-2578.